Features dan Keunggulan Panel Fire Alarm Notifier NFS-320E

• Certified for seismic applications when used with the appropriate seismic mounting kit.
• Approved for Marine applications when used with listed compatible equipment. See DN-60688.
• One isolated intelligent Signaling Line Circuit (SLC) Style 4, 6 or 7.
• Up to 159 detectors and 159 modules per SLC; 318 devices maximum.
  • Detectors can be any mix of ion, photo, thermal, or multi-sensor; wireless detectors are available for use with the FWSG.
  • Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay; wireless modules are available for use with the FWSG.
• Optional FWSG Wireless SWIFT Gateway supports wireless SLC devices.
• Standard 80-character display.
• Network options:
  • High-speed network for up to 200 nodes (NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYXWorks, NFS-3030, NFS-640, and NCA).
  • Standard network for up to 103 nodes (NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYXWorks, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP-300/
    400, AFP-1010, and AM2020). Up to 54 nodes when DVCEM is used in network paging
• 6.0 A power supply with four Class A/B built-in Notification Appliance Circuits (NAC). Selectable System Sensor, Wheelock, or Gentex strobe synchronization.
• Built-in Alarm, Trouble, Security, and Supervisory relays.
• VeriFire® Tools online or offline programming utility. Upload/Download, save, store, check, compare, and simulate panel databases. Upgrade panel firmware.
• Autoprogramming and Walk Test reports.
• Multiple central station communication options:
  • Standard UDACT
  • Internet
  • Internet/GSM
• 80-character remote annunciators (up to 32).
• EIA-485 annunciators, including custom graphics.
• Printer interface (80-column and 40-column printers).
• History file with 800-event capacity in nonvolatile memory, plus separate 200-event alarm-only file.
• Alarm Verification selection per point, with automatic counter.
• Presignal/Positive Alarm Sequence (PAS).
• Silence inhibit and Auto Silence timer options.
• NAC coding functions:
  • March time.
  • Temporal.
  • California two-stage coding.
  • Canadian two-stage.
  • Strobe synchronization.
• Field-programmable on panel or on PC with VeriFire® Tools program check, compare, simulate.
• Full QWERTY keypad.
• Battery charger supports 18 – 200 AH batteries.
• Non-alarm points for lower priority functions.
• Remote ACK/Signal Silence/System Reset/Drill via monitor modules.
• Automatic time control functions, with holiday exceptions.
• Extensive, built-in transient protection.
• Powerful Boolean logic equations.

Spesifikasi Panel Fire Alarm Notifier NFS-320E

• Primary input power, CPU-320 board: 120 VAC, 50/60 Hz, 3.0 A. CPU-320E board: 220/240 VAC, 50/60 Hz, 1.5 A.
• Total output 24 V power: 6.0 A in alarm. (NOTE: The power supply has a total of 6.0 A of available power). This is shared by all internal circuits.
• Standard notification circuits (4): 1.5 A each.
• Four-wire detector power: 1.25 A.
• Non-resettable regulated power outputs: 1.25 A each.
• Battery charger range: 18 AH – 200 AH. Use separate cabinet for batteries over 25 AH.
• Optional high-capacity (25 – 120 AH) battery charger: CHG-120 (see CHG-120 data sheet, DN-6040).
• Float rate: 27.6 V.

Brosur Panel Fire Alarm Notifier NFS-320E

Silahkan mendownload brosur Panel Fire Alarm Notifier NFS-320E 1 Loop untuk mendapatkan informasi lebih detail tentang produk tersebut.

Harga Panel Fire Alarm Notifier NFS-320E

Harga Panel Fire Alarm Notifier NFS-320E 1 Loop yang kami tawarkan sangat bersaing : Silahkan menghubungi kami di 081317698478, 087701989383 untuk mendapatkan harga terbaik langsung dari Distributor Notifier. Call atau WhatsApp untuk harga terbaik